The Full Mercedes-Benz cars package includes the MN030, MN032, MN033, MN034, MN035, MN037, and MN038 licenses. Below you can see what each one of them covers as functionalities. 1. MN030 – Odometer Calibration & Cluster Module Replacement (FBS4)OBDII-based mileage adjustment and virgin/adapt cluster modulesBlocks synchronization between cluster and EZS/EIS on IC213-equipped FBS4 vehiclesRetrofit support: analogue → digital dialsSupports models: W213, W205, W222, W217, W238, W253, W257, W463, W447 (with IC213), and related models2. MN032 – FBS4 Control Module Virginization/PersonalizationDesigned from the ground up for FBS4 (DAS) modulesFeatures: virginize modules, read/write personalization, module activation, read module status, VIN programmingSupports via OBDII: MED17, EDC17, SID310, Delphi‑CRD3, CR40/41/42/43/6/60/61, MED40/41, MED177/1773/1775, CRR1/1+, CRD3S2, hybrid starter generators, MRD1/MRG1/CRR2/EMS71 via bench or distribution-box setupsBench support (with ZN051/ZN030): DSM, VGS-DCT, VGS-NAG3, MRD1/MRG1 (pre-2021); DSM via ABPROG connection3. MN033 – Electronic Steering Lock (ELV/ESL) Fault ClearingClears “ELV Component Fault” that prevents vehicle startWorks on all FBS4 vehicles with ESL/ELV modulesCan be done in-vehicle or on‑bench; ZN151 Distribution Box recommended4. MN034 – FBS4 Personalization ExpertExpert-level personalization for all virgin FBS4 generation modules using internal CAN‑BUSRemoves limitations from production year changes or missing old units (e.g., MED177/1775, CR40/60/61, etc.)Enables ECU personalization via OBDII when no prior data is availableIntended to complement MN032; partial coverage for W223/W206 requiring a future adapter5. MN035 – VGS4‑NAG2 TCU Virgin & Personalization via ABPROGWorks with VGS4‑NAG2 7G‑Tronic FBS4/DAS4 TCUs using ABPROGFeatures: read FBS4 data, virginize TCU, write personalization via internal CAN‑BUS (also via internal CAN‑BUS with MN034 license)Requires: ZN030 ABPROG programmer, AVDI, and active AMS6. MN037 – IC177 Cluster Calibration (Bench)Calibrates IC177 dashboard clusters (2018–2023 vehicles) via PCB bench modeAdjusts mileage, blocks EZS sync; does not affect EZS moduleSupports A-Class, B-Class, GLA, CLA, GLB, EQA, EQB, CLS, AMG GT 4‑door, and similar IC177 vehiclesRequires ZN085 RH850/V850 Programmer, ZN092 adapter, CB501 cable; bench soldering/un‑soldering involved; wiring diagrams included7. MN038 – IC223 / IC177M Cluster Calibration (Bench, 2020+)Similar to MN037 but tailored for newer clusters IC223 (2020+) and IC177 M (2023+) with Visteon R7F701529 BGA processorsBench-mode mileage calibration and EZS sync block, using emulator, no EZS module handlingSupported models include: S-Class (W223), C‑Class (W206/S206/V206/X206), GLC (X254/C254), CLE (C236/A236), and other IC223 vehicles—plus newer vehicles with IC177 M(A/B/CLA/GLA/GLB/EQA/EQB/CLS/GLE/GLS/AMG GT facelift)Requires ZN085 Programmer, ZN092 adapter, EM019 adapter, CB501 cable; bench PCB solder/un‑solder, wiring diagrams includedLicenseFunctionalityVehicles / ModulesHardware RequiredMN030Odometer reset & cluster virgin/adapt (OBDII)FBS4 dashboards (IC213/IC222)AVDI + AMSMN032FBS4 module virginization/personalizationECUs, DSM, TCUsZN051, ZN030, CB cablesMN033Clears ESL/ELV faultsAll FBS4 ESL/ELVZN151MN034Expert personalization via internal CANAll FBS4 modulesAVDI + MN032MN035Virgin/personalize VGS4‑NAG2 TCU7G‑Tronic TCUsZN030, AVDI + AMSMN037IC177 cluster calibration (PCB bench)2018–2023 IC177 dashboardsZN085, ZN092, CB501MN038IC223/IC177 M calibration (2020+)Newer clusters post-2020ZN085, ZN092, EM019, CB501 An AVDI interface with a valid AMS subscription are required for the purchase and use of this package.ALL SALES OF ABRITES PRODUCTS HARDWARE AND SOFTWARE ARE FINAL!








